BatPac - M2

$75.00
Battery mounted power distribution.
In stock
Save this product for later
Share this product with your friends
BatPac - M2
Product Details


Innovative & simple, our BatPacs are problem solvers.

The M2 BatPac sits securely atop a standard RBC2 battery, connects to the terminals, and provides safe, secure power distribution. It only adds 1/2″ to the overall height of the battery, and zero to the width or length:

The body of the BatPac M2 is machined from a solid piece of marine grade HDPE.

The included mini blade fuse protects your gear, and is replaceable without tools.

There are two Anderson Power Pole pigtails… one is fused, the other is not.

The fused pigtail is the one to connect to your radio, RC vehicle, USB charger, etc.

The un-fused pigtail is for charging the battery, running gear that does not need fused power, or connecting another battery in parallel.

The embedded volt meter shows you the voltage of the battery, and includes a recessed on/off switch.

There are four thin velcro straps that wrap around your battery, holding the BatPac securely in place.

This BatPac will ONLY fit onto a RBC2 battery. These are very common batteries, often used in emergency lighting, large scooters, and computer back up systems.

An excellent example of an SLA (Sealed Lead Acid) battery is THIS ONE from Amazon.

A smart upgrade is a ‘Drop In’ LiFePo4 battery. This gives you the benefit of the amazing LiFePo4 chemistry in a battery that is designed to work with standard SLA chargers. Brilliant. One of the best we have tested (and use ourselves) is assembled here in the USA. It has an impressive 10 amp hours of stored energy. Available HERE from the maker, Dakota Lithium.

The BatPac is 5.9″ x 2.5″ x 0.5″ and weighs just 3.1 ounces!


An excellent companion to the M2 BatPac is the Nano USB:


Do you need a great battery at a great price? Our friends at EcomElectronics sell the right battery, with free shipping. Click Here for their product page.


ACCESSORIES

The BatPac, thanks to its versatility, works well with a variety of accessories. See our complete selection of add-ons that will enhance the capabilities of your BatPac! Check out the video, below, or scroll down to see individual accessories and bundles:



Anderson Power Pole to 3 Amp USB

Awesome little add-on. Plugs into the Andersons on the BatPac, and outputs up to 3 amps at 5 volts via the female USB socket. Great for powering or charging small devices that accept USB power. This is a high quality cable that we assemble in house. The wire is 18 gauge, and the Andersons have 30 amp contacts in standard ARES / RACES configuration. Length is 1 foot.

Anderson Power Pole to Female Cigarette Socket

Handy little adapter. Plugs into the Andersons on the BatPac, and accepts any standard cigarette-style plug. Great for powering or charging small devices that would plug into a vehicle. This is a high quality cable that we assemble in house, using the same marine grade locking receptacle as in our JuiceBoxes. The wire is 14 gauge, and the Andersons have 30 amp contacts in standard ARES / RACES configuration. Soft, pliable rubber boot protects the contacts from dust and splashing. Length is 1 foot.

Ships free to all 50 states


Anderson Power Pole to Male Cigarette Socket

Plugs into the unfused Andersons on the BatPac, and then into a standard cigarette socket (like in your car). An effective field expedient method of charging your battery via the BatPac. This is a high quality cable that we assemble in house. The wire is 14 gauge, the socket has an internal 8 amp fuse, and the Andersons have 30 amp contacts in standard ARES / RACES configuration. Length is 3 feet.

Ships free to all 50 states


Anderson Power Pole to SAE ‘J’ Plug

Plugs into the unfused Andersons on the BatPac, and then into the common connection on most small chargers (Schumacher, NOCO, etc.) An excellent method of charging and maintaining your battery via the BatPac. This is a high quality cable that we assemble in house. The wire is 18 gauge, and the Andersons have 30 amp contacts in standard ARES / RACES configuration. Length is 5 inches.

Ships free to all 50 states


Anderson Power Pole to Battery Clamps

Plugs into the unfused Andersons on the BatPac, and then clamps onto any battery terminal(s). Versatile, in that you could charge the BatPac or use the BatPac’s power, depending on your needs. This is a high quality cable that we assemble in house. The wire is 10 gauge, and the Andersons have 30 amp contacts in standard ARES / RACES configuration. Length is 6 feet.

Ships free to all 50 states


Molle Pouch, Mil-Spec

This pouch is honest Mil-Spec. It has double rust-proof zippers, a drain hole, and is constructed of 600 denier nylon. It has vertical molle straps on back with snaps, and horizontal ladder molle on the front. It has additional pockets and elastic sleeves inside for pen, flashlight, etc.

8″ x 6″ x 3″

Ships free to all 50 states


Accessory Bundle

(For folks who already have a BatPac, or just want an awesome deal on some high-end Power-Pole accessories)

Includes every accessory listed above.

Total value if purchased separately is $120.00

Buy now for $95 with free shipping to all 50 states.

BP_ACC_Bundle-01


FOR A LIMITED TIME

Buy the $95 bundle and get a BatPac RBC2 for just $30!

Includes all accessories plus the RBC2

My Shopping Bag

Recently Viewed Products